Last Updated: Jan. Which Regulatory Marker means Swimming Area. Bully Side Steps. Bully Bull Bars. Bully Running Boards. Bully Tonneau Covers. Bully Wheel Covers. Bully Hitch Steps.
Bully Chrome Grilles. Remove and discard the bolt as illustrated on both sides of the vehicle. For NAS market vehicles only. Remove and discard the 2 bolts as illustrated on both sides of the vehicle. Fitting Instruction. Follow the appropriate steps depending on the part that is being installed and the wheelbase of the vehicle.
If the fixed side steps are being installed to vehicles with 90 or wheelbase, then complete steps 2 to If the side tubes are being installed to vehicles with 90 or wheelbase, then complete steps 28 to Side step brackets for vehicles with 90 wheelbase will have the text "90" on the identifier label.
Locate the identifier label on each bracket. Follow the appropriate steps depending on if the vehicle has 90 or wheelbase. Install the side step brackets to the vehicle.
For vehicles with wheelbase complete steps 5 to 7 and then continue at step For vehicles with 90 wheelbase complete steps 8 to 11 and then continue at step Complete step for all vehicle markets except for NAS. Step includes the install of 2 spacers G between the brackets and the rocker panel. Make sure the brackets are installed at the correct location on the vehicle. Install the front side step brackets B1 and B2 to both sides of the vehicle.
Install, but do not fully tighten the 2 bolts D and the 2 spacers G. Install, but do not fully tighten the 2 bolts E. Complete this step only for NAS market vehicles with wheelbase. Install, but do not fully tighten the 2 bolts D.
Complete this step for all vehicle markets with wheelbase. Install the rear side step brackets C1 and C2 to both sides of the vehicle. Complete this step for all vehicle markets except for NAS. Complete this step only for NAS market vehicles with 90 wheelbase.
Step includes the install of a spacer G to the rear fixing of the rear bracket. Install, but do not fully tighten the 2 bolts D and the spacer G. The spacer is only installed to the rear fixing. Observe the hand symbol label on the side step bars. This step only applies to vehicles with 90 wheelbase.
Locate the hand symbol label on each of the side step bars. The hand graphic points towards the front of the vehicle to help when installing the side step bars to vehicles with 90 wheelbase. Install, but do not fully tighten the bolts F. The side step bar must be installed to the correct side of the vehicle. For vehicles with 90 wheelbase take particular care as the handedness is not obvious.
Side step shown being installed to vehicles with wheelbase. Install the side step bar A to the brackets B and C using the 6 bolts F. Make sure the side step bar is installed to the correct side of the vehicle. The hand graphic on the side step bar must face towards the front of the vehicle.
Tightening sequence shown must be followed. Tightening sequence shown on vehicles with wheelbase. Tightening sequence is same for vehicles with 90 wheelbase. Fully tighten the 4 bolts E as illustrated. Fully tighten the bolt E. Torque: 24 Nm Fully tighten the remaining 3 bolts E. Torque: 24 Nm. Tightening shown on vehicles with wheelbase. Tightening is same for vehicles with 90 wheelbase.
Fully tighten the 4 bolts D. Torque: 64 Nm. Side step shown being removed from vehicles with wheelbase. Remove the bolts F and remove the side step bar A. The undershields and rocker panels will need to be installed before the final install of the side step bar. Repeat steps 12 to 16 on the other side of the vehicle. Install the left undershield. Install and tighten the 13 bolts. Torque: 5. Install the right undershield.
Replace any retaining clips, that were damaged during the removal process, with the appropriate quantity of spare clips H from the kit. Vehicles with 90 wheelbase will use 11 clips. Vehicles with wheelbase will use 12 clips. Install the rocker panel. Install the rocker panel to the 11 clips 90 wheelbase or 12 clips wheelbase. Install and secure the 9 lower clips. Install the rear fender moulding on vehicles with 90 wheelbase.
Install the front fender moulding bracket. Install the front fender moulding bracket to the 2 clips. Install and secure the 2 lower clips. Make sure to protect the paintwork. Make sure the clips are pushed in sufficiently so they are fully engaged. Do not use force on the cladding to engage the clips. Do not hit the side of the cladding to engage the clips. Install the 2 lower clips first and then install the 2 upper clips.
Install the front fender moulding to the vehicle. Adjust the 2 clips to the correct gap as illustrated. Install the 2 lower clips. Install the 2 upper clips. Install the front fender moulding.
Visually check the top clip, that is closest to the wheel, to make sure the clip is fully engaged. Make sure the fender moulding is correctly aligned to the surrounding bodywork. For vehicles with 90 wheelbase, the side step bar must be installed to the correct side of the vehicle. Complete step for the installation of the fixed side steps. For vehicles with 90 wheelbase, make sure the side step bar is installed to the correct side of the vehicle.
Torque: 10 Nm. Vehicles with wheelbase, front brackets have a rectangular notch and rear brackets have a oval notch. Vehicles with 90 wheelbase, front brackets have a rectangular notch and rear brackets have a triangular notch. The appearance of the arrowed notch is different between front brackets and rear brackets. The notch appearance also varies between vehicles with 90 and wheelbase.
Install the side tube brackets to the vehicle. For vehicles with wheelbase complete steps 31 to 33 and then continue at step For vehicles with 90 wheelbase complete steps 34 to 37 and then continue at step Observe the location identifier FL or FR on the brackets. Install the front side tube brackets B1 and B2 to both sides of the vehicle. Observe the location identifier RL or RR on the brackets.
Install the rear side tube brackets C1 and C2 to both sides of the vehicle. Observe the hand symbol label on the side tubes. Locate the hand symbol label on each of the side tubes. The hand graphic points towards the front of the vehicle to help when installing the side tubes to vehicles with 90 or wheelbase.
The side tube must be installed to the correct side of the vehicle. Side tubes shown being installed to vehicles with wheelbase. Install the side tube A to the brackets B and C using the 6 bolts F. Make sure the side tube is installed to the correct side of the vehicle.
The hand graphic on the side tube must face towards the front of the vehicle. Remove the bolts F and remove the side tube A.
0コメント